• The fully sealed oil immersed water cooling mode is used to operate under the severe environment.
• The oil immersed transformer and power elements can increase the heat dissipation surface, dissipate heat quicker and extend the use life of the rectifier.
• The special 10# and 25# oil for the transformer is used, which features better insulation and heat conductivity.
• The heat radiators are installed outside the box for better cooled effect.
• The oil level is directly displayed on the oil gauge on the panel.
• Both voltage and current regulated control mode are used.
• Perfect protection functions including over-voltage, over-current, over-heat, phase failure, water lack and short circuit.
• Manual adjustment or digital network remote control.
• The common tap-water can be used for cooling, but deionized water is more recommended.

The AC input voltage is transformed by a transformer to obtain low-voltage AC, and then rectified into DC by a thyristor to obtain the required output voltage and current. The control circuit samples the output voltage and output current, and then controls the phase angle of the thyristor trigger conduction moment through the phase control method to keep the output voltage or current stable after closed-loop feedback.

Plastic Plating, hard chromium process for tool module, hardware, surface process for hardware parts, electrolysis in harsh environment.