Input parameters: Three phase AC380V±10%, 50HZ

Output parameters: DC  0~100V 0~20000A

Output mode: Common DC output

Cooling method:  Oil immersed water cooled

Power supply type: Thyristor rectifier

Application Industry: Plating industry, such as hard chrome plating

Electroplating is the process of applying a thin layer of other metals or alloys on the surface of certain metals by electrolysis. It is a process of applying a metal film to the surface of metals or other materials to prevent metal oxidation (such as rust), improve wear resistance, electrical conductivity, reflectivity, corrosion resistance (copper sulfate, etc.) and enhance aesthetics.

Types of plating:

• Copper plating: priming, enhance the ability to adhere to the plating layer, and the ability to resist corrosion. (Copper is easy to oxidation, oxidation, copper green no longer conductive, so copper-plated products must do copper protection)
• Nickel plating: priming or appearance, to enhance the corrosion resistance and wear resistance, (where the chemical nickel for the modern process of wear resistance than chrome plating). (Note that many electronic products, such as DIN head, N head, no longer use nickel priming, mainly because nickel is magnetic, will affect the electrical properties inside the passive intermodulation)
• Gold plating: improve the conductive contact impedance, enhance signal transmission. （Gold is the most stable, but also the most expensive.)
• Palladium-nickel plating: improve the conductive contact impedance, enhance signal transmission, wear resistance than gold.
• Silver plating: improve the conductive contact impedance, improve signal transmission. (Silver performance is the best, easy to oxidation, oxidation also conductive)

Elements of electroplating：

• Cathode: the plated object, referring to various connector terminals.
• Anode: If it is soluble anode, it is the metal to be plated. If it is insoluble anode, most of them are precious metals (white gold, iridium oxide).
• Plating solution: plating solution containing ions of the metal to be plated.
• Plating tank: The tank that can bear and store the plating solution, generally considering strength, corrosion resistance, temperature resistance, etc.
• Rectifier: The equipment to provide DC power supply.

• The fully sealed oil immersed water cooling mode is used to operate under the severe environment.
• The oil immersed transformer and power elements can increase the heat dissipation surface, dissipate heat quicker and extend the use life of the rectifier.
• The special 10# and 25# oil for the transformer is used, which features better insulation and heat conductivity.
• The heat radiators are installed outside the box for better cooled effect.
• The oil level is directly displayed on the oil gauge on the panel.
• Both voltage and current regulated control mode are used.
• Perfect protection functions including over-voltage, over-current, over-heat, phase failure, water lack and short circuit.
• Manual adjustment or digital network remote control.
• The common tap-water can be used for cooling, but deionized water is more recommended.